诗词屋>英语词典>clamps翻译和用法

clamps

英 [klæmps]

美 [klæmps]

v.  (用夹具)夹紧,夹住,固定; 紧紧抓住; 紧夹住; 被抓住; 被夹紧; 用夹锁锁住(车)
n.  夹具; 夹子; 夹钳; 车轮夹锁(用于锁住违章停放的车辆)
clamp的第三人称单数和复数

柯林斯词典

  • 夹子;夹具;夹钳
    Aclampis a device that holds two things firmly together.
    1. VERB (用夹具)夹紧,夹住,固定
      When youclampone thingtoanother, you fasten the two things together with a clamp.
      1. Somebody forgot to bring along the U-bolts to clamp the microphones to the pole.
        有人忘了带把麦克风固定在支架上的U形螺栓。
    2. VERB 将…固定(在某处);紧紧抓住
      Toclampsomething in a particular place means to put it or hold it there firmly and tightly.
      1. Simon finished dialing and clamped the phone to his ear...
        西蒙拨完号,把听筒贴在耳边。
      2. He clamped his lips together...
        他紧闭双唇。
      3. You beg him to try just one spoonful, and he clamps his mouth shut...
        你求他就尝一匙,可他就是不张嘴。
      4. Peter jumped to his feet with his hand clamped to his neck.
        彼得一只手捂着脖子,腾地跳了起来。
    3. (将违章停放的车辆扣在原地的)夹钳,车轮固定夹
      Aclampis a large metal device which is fitted to the wheel of an illegally parked car or other vehicle in order to prevent it from being driven away. The driver has to pay to have the clamp removed.
      1. in AM, use 美国英语用 Denver boot

      2. VERB 给(车辆)上夹钳
        Toclampa car means to fit a clamp to one of its wheels so that it cannot be driven away.
        1. Courts in Scotland have ruled it illegal to clamp a car parked on private ground and then to demand a fine.
          苏格兰法院裁定,将停在私人地界上的车辆上夹钳并索要罚款的行为是违法的。
      3. in AM, use 美国英语用 boot

      双语例句

      • Tighten the clamps using the special pliers or a commercially available special pliers.
        使用专用钳子或商用的专用钳子拧紧卡箍。
      • Loosen screw-type hose clamps and disconnect intake-air distributor.
        松开螺钉式软管卡箍并断开进气分配器。
      • The steel pipes should be secured with clamps.
        这些钢管应该用夹子固定起来。
      • Remove clamps from resonance tube.
        从谐振管上拆下卡箍。
      • Loosen both hose clamps at intake distributor.
        旋开进气分配器上的两个软管卡箍。
      • The SC Series Swing Clamps combine linear and rotary motions.
        在SC系列摇摆夹结合线性和旋转运动。
      • Position C-pillar trim panel and press it into the fastening clamps.
        放置c柱装饰板并将其按入到固定卡子中。
      • Unscrew the fastening nuts to the fastening clamps of both refrigerant lines.
        从两条制冷剂管路的紧固卡箍上拧下紧固螺母。
      • For securing clamps and hose clamps.
        用来紧固卡箍和软管卡箍。
      • Tighten screw-type hose clamps in correct position.
        将螺钉式软管卡箍在正确位置拧紧。